Pular para o conteúdo
Tool

Mouse Test

Test every mouse button, the wheel and the polling rate, and find out if there are ghost double clicks. Right in your browser.

What it is

The mouse test checks, right in your browser, whether every part of your mouse responds as it should: left, right and middle buttons, the two side buttons and the scroll wheel in both directions. It also measures the polling rate (how many times per second the mouse reports its position to the computer) and warns you about ghost double clicks, the most common fault in a worn mouse.

It is useful if you suspect a button is failing, if you just bought a mouse and want to check everything before the return window closes, and if you play games and want to know whether the mouse delivers the rate on the box.

How to use

  1. Put the pointer inside the dashed area.
  2. Press each button, one at a time. In the drawing, the button turns blue while pressed and green once tested.
  3. Spin the wheel up and down and press the wheel itself (that is the middle button).
  4. Try the side buttons. Inside the area they don't go back or forward a page.
  5. Move the mouse in fast, continuous circles to see the polling rate and its peak.
  6. Click the same button several times in a row and watch for the double click warning.

The counter shows how many of the six items have been tested (five buttons and the wheel in both directions).

Ghost double clicks: how the test detects them

The symptom is familiar: you click once and the computer reads two. Dragging a file turns into dropping it halfway, selecting text fails, and in games the weapon fires in bursts. The usual cause is a worn micro-switch, the small part under the button whose metal contact starts to "bounce" and send two signals in a row.

The test measures the gap between two presses of the same button. An intentional double click, even a fast one, sits around 100 to 200 ms. When two presses arrive less than 80 ms apart, the test flags them as suspicious and shows the exact gap. A single case may have been your finger; several warnings during single clicks are a clear sign of a faulty switch.

Before blaming the mouse, rule out the computer: try another USB port or another PC and check the double click speed in your system settings. If the fault follows the mouse, your options are warranty, cleaning with compressed air (sometimes it works) or replacing the micro-switch.

Polling rate: what the number means

Rate Time between reports Where you see it
125 Hz 8 ms Regular office mouse
500 Hz 2 ms Entry-level gaming mice
1,000 Hz 1 ms Standard for gaming mice
4,000 to 8,000 Hz 0.25 to 0.125 ms High-end models, heavier on the CPU

The value fluctuates while you move, so the test shows the current rate and the peak. Slow movements produce fewer reports; to measure it properly, move fast and without stopping. Browsers have limits too: some, like Safari, deliver movement at the screen's refresh rate, so a 1,000 Hz mouse may show up as 60 or 120 Hz. In Chrome, Edge and Firefox the reading gets much closer to the real value.

If the result is far below what you expected in Chrome, check in the manufacturer's software that the mouse is set to its maximum rate and that it is plugged straight into the computer rather than into a USB hub.

Side buttons and wheel

The side buttons work as back and forward in the browser. Inside the test area they are blocked so you don't leave the page; outside it they work normally.

For the wheel, the test counts steps up and down separately. A wheel that skips, scrolls the wrong way or only registers one direction usually has dirt in the encoder, the part that reads the rotation.

To measure click speed instead of faults, use the CPS test. And if the problem is the keyboard, the keyboard test shows it key by key.

Frequently asked questions

How do I know if my mouse is double clicking?

Click the same button once at a time inside the test area. If the ghost double click warning appears with gaps under 80 ms without you clicking twice, the button is registering extra clicks. That is almost always a worn micro-switch.

What is a good polling rate?

For everyday use, 125 Hz is enough. For gaming, 1,000 Hz is the standard on gaming mice and makes movement smoother with less delay. Rates of 4,000 Hz or more bring a small gain and put more load on the CPU.

Why does the polling rate show lower than the box says?

Three common reasons: the mouse was moved slowly (fewer reports), the browser caps events to the screen's refresh rate (Safari does this), or the mouse is set to a lower rate in the manufacturer's software. Move fast in circles and use Chrome, Edge or Firefox for a more accurate reading.

The side buttons don't work in the test. What should I do?

Check that the mouse really has side buttons and that the manufacturer's software hasn't remapped them to something else (like DPI or a macro). Some mice only send the side buttons after the software is installed. If nothing shows up in the test or in the browser, the problem may be physical.

Does the mouse test work on a phone?

Tapping the screen counts as a left click, but the rest of the test needs a real mouse. If you connect a mouse to a phone or tablet over USB or Bluetooth, the main buttons and the wheel usually work.

About this content

Written by:
Ferramenta Grátis
Updated on:
November 18, 2026

Related tools